Pilot 4WD V6-3.5L (2008)
Rear Door Weatherstrip: Service and Repair
Rear Door Upper Seal
Rear Door Upper Seal Replacement
NOTE:
-
Take care not to scratch the door.
-
Use a clip remover to remove the clip.
1. Remove the door sash trim.
2. Detach the door weatherstrip clip, then remove the door upper seal (A).
3. Install the upper seal in the reverse order of removal, and note these items:
-
Check if the clip is damaged or stress-whitened, and if necessary, replace it with new one.
-
Push the clip into place securely.
-
Make sure the upper seal is installed in the holder (B) securely.