Pilot 4WD V6-3.5L (2008)
Seat Latch Cable: Service and Repair
Third Row Seat-Back Recline Cable
Third Row Seat-back Recline Cable Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend the cable.
1. Remove the third row seat-back recline lever.
2. While; holding the lever (A) open, carefully pry out the cover (B) with a flat-tip screwdriver to release the tabs (C), then remove the cover.
3. Disconnect the recline cables (A). There is no inner recline cable on the right recline lever.
4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cables are connected securely.