Pilot 4WD V6-3.5L (2008)
^
Pinch the U-clip securely to prevent the parking brake lever from coming out from the brake shoe.
3. Connect the parking brake cable (A) to the parking brake lever (B).
4. Apply a thin coat of Molycote 44 MA grease to the shoe ends and connecting rod ends (A), sliding surfaces (B), and opposite edges of the parking
brake shoe (C) as shown. Wipe off any excess. Keep grease off the brake linings.
5. Install the tension pin (A), the retainer spring (B), and the retainer (C) on the rearward brake shoe (D). Make sure the tension pin does not contact
the parking brake lever.
6. Clean the threaded portions of the clevis A, and coat the threads with multipurpose grease. Clean the sliding surface of the clevis B, and coat the
sliding surface with multipurpose grease. Install the clevis A and B on the adjuster nut (C), and shorten the clevis A by turning the adjuster nut.