Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-1946001.png)
Air Door Actuator / Motor: Service and Repair
Front Mode Control Motor Replacement
Front Mode Control Motor Replacement
1. Disconnect the 7P connector (A) from the front mode control motor (B). Remove the rods (C) of the front mode control motor from the front mode
control motor linkage (D) and the front mode control linkage (E). Remove the self-tapping screws and the front mode control motor from the
heater unit.
2. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.