Pilot 4WD V6-3.5L (2008)
Is PGM-FI main relay 2 (FUEL PUMP) OK?
YES - Check the fuel pump, and replace it if necessary. Also replace the No. 1 FUEL PUMP (15 A) fuse.
NO-Replace PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 1 FUEL PUMP (15 A) fuse.
43. Jump the SCS line with the HDS.
44. Disconnect PCM connectors A (44P) and B (44P).
45. Turn the ignition switch ON (II).
46. Measure voltage between PCM connector terminal B37 and body ground.
Is there battery voltage?
YES - Go to step 47.
NO - Repair open in the wire between the No. 1 FUEL PUMP (15 A) fuse and the PCM (B37).
47. Measure voltage between PCM connector terminal A6 and body ground.
Is there battery voltage?
YES - Go to step 53.
NO - Go to step 48.
48. Turn the ignition switch OFF.
