Pilot 4WD V6-3.5L (2008)
36. Remove PGM-FI main relay 2 (FUEL PUMP) (A).
37. Check for continuity between PCM connector terminal B37 and body ground.
Is there continuity?
YES - Repair short in the wire between the No. 1 FUEL PUMP (15 A) fuse and the PCM (B37), PGM-FI main relay 2 (FUEL PUMP), the
immobilizer control unit receiver, or the SRS unit. Also replace the No. 1 FUEL PUMP (15 A) fuse.
NO - Go to step 38.
38. Remove the driver's side second row seat.
39. Remove the access panel from the floor.
40. Disconnect the fuel pump 5P connector.
41. Check for continuity between fuel pump 5P connector terminal No. 5 and body ground.
Is there continuity?
YES - Repair short in the wire between the fuel pump and PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 1 FUEL PUMP (15 A) fuse.
NO - Go to step 42.
42. Test PGM-FI main relay 2 (FUEL PUMP).