Pilot 4WD V6-3.5L (2008)
9. If necessary, remove the front seat belt protector (G).
10. Remove the B-pillar upper trim.
11. Remove the shoulder anchor adjuster (A).
12. Install the front seat belt and retractor in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers, collars, and bushings on the upper and lower anchor bolts as shown.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the audio and the navigation system (if equipped), then enter the audio presets.
-
Reset the clock.
-
Do the power window control unit reset procedure.