Pilot 4WD V6-3.5L (2008)
4. Remove the center anchor bolt (A), then remove the seat belt buckle (B) from the inner seat track.
5. Remove the seat belt switch harness (A):
-
Driver's manual height adjustable seat: Adjust the seat cushion to its maximum height, and remove the harness.
-
Driver's 8-way power seat and passenger's manual seat: Remove the seat cushion mounting bolts (B) from the seat linkage (C), then lift the seat
cushion halfway from the seat linkage, and remove the harness.
6. Install the buckle in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the anchor bolt before reinstallation.
-
Assemble the washers and collar on the center anchor bolt as shown.
-
Move the seat up and down to make sure the buckle harness is not pinched.