Pilot 4WD V6-3.5L (2008)
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers, collars, and bushing on the upper anchor bolt as shown.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the third row seat belt.
Center Third Row Seat Belt
1. Remove the headliner.
2. Remove the bolts (A) and screw (B), then remove the third row seat belt cover bracket (C).
3. Remove the upper anchor bolts (A), support bracket bolt (B), and the retractor bolts (C), then remove the upper anchor (D), center seat belt (E),
and retractor (F).
4. Install the center seat belt and retractor in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the anchor bolts before reinstallation.
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Check that the retractor locking mechanism functions.
-
Before installing the upper anchor bolt, make sure there are no twists or kinks in the center seat belt.
Seat Belt Buckle/Center Seat Belt Detachable Anchor
1. Fold the left third row seat down.