Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-1686001.png)
Alternator: Removal and Replacement
Alternator Removal and Installation
REMOVAL
1. Make sure you have the anti-theft codes for the audio system and the navigation system (if equipped), then write down the audio presets.
2. Disconnect the negative cable from the battery.
3. Remove the engine cover.
4. Remove the drive belt.
5. Remove the harness clamp (A), then remove the bracket (B).
6. Disconnect the alternator connector (C) and the BLK wire (D) from the alternator.
7. Remove the mounting bolt (A) and alternator bracket mounting bolt (B), then remove the alternator.
INSTALLATION
1. Install the alternator.