Pilot 4WD V6-3.5L (2008)
2. Connect the alternator connector (A) and the BLK wire (B) to the alternator. Make sure the crimped side of the ring terminal faces away from the
alternator when you connect it.
3. Install the bracket (C), then install the harness clamp (D).
4. Install the drive belt.
5. Install the engine cover.
6. Connect the negative cable to the battery.
7. Enter the anti-theft codes for the audio system and the navigation system (if equipped), then enter the audio presets.
8. Do the power window control unit reset procedure.
9. Set the clock (on vehicles without navigation).