Pilot 4WD V6-3.5L (2008)
Starter Brush Holder Test
15. Check for continuity between the (+) brush (A) and (-) brush (B). If there is continuity, replace the brush holder assembly.
Planetary Gear Inspection
16. Check the planetary gears (A) and internal gear (B). Replace them if they are worn or damaged.
Overrunning Clutch Inspection
17. Slide the overrunning clutch along the shaft. Replace it if it does not slide smoothly.
18. Rotate the overrunning clutch (A) in both directions. It should lock and move upward in one direction and rotate smoothly in the other direction. If
it does not lock in either direction, or if it locks both directions, then replace it.