Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-1462021.png)
2. Make marks (A) on each roller (B) and inboard joint (C) to identify the locations of rollers and grooves in the inboard joint. Then remove the
inboard joint on the shop towel (D), Be careful not to drop the rollers when separating them from the inboard joint.
3. Make marks (A) on the rollers (B) and spider (C) to identify the locations of ball rollers on the spider, then remove the rollers.