Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
8. Remove the dipstick and the tube.
9. Remove the cylinder head cover.
NOTE: The procedures in steps 10 and 11 are for reusing the timing belt. For replacing the timing belt, skip these procedures and go to step 12.
10. Use an open-end wrench to loosen the maintenance bolt. If it cannot be loosened with an open-end wrench, a box wrench can be used after
removing the lock pin.
NOTE: Use of a tool should be limited to initial loosening only.
11. Unscrew the maintenance bolt by hand until it stops. The auto-tensioner bracket is now fixed.
NOTE:
-
Never use a tool to unscrew the maintenance bolt after initial loosening it.
-
If the auto-tensioner has been extended and the timing belt cannot be installed, remove the auto-tensioner, compress it and reinstall it.