Prelude L4-2157cc 2.2L DOHC (VTEC) MFI (2001)
12. Remove the middle cover.
NOTE: Do not use the middle cover to store removed items.
13. Remove the pulley bolt and crankshaft pulley.
14. Remove the lock pin and rubber seals, then remove the lower cover.
NOTE: Do not use the lower cover to store removed items.
15. Loosen the adjusting nut 2/3-1 turn.
Push the tensioner to remove tension from the timing balancer belt, then retighten the adjusting nut.
16. Remove the timing balancer belt and timing belt.
INSTALLATION
New Belt
NOTE: This procedure is to replace the timing belt.
Install the timing belt and timing balancer belt in the reverse order of removal; Only key points are described here.
NOTE: Clean the middle and lower covers before installation.
1. Remove the timing balancer belt drive pulley.