H1 V8-6.5L DSL (1998)
Fuel Filler Hose: Service and Repair
Figure 3-44: Filler Tube-To-Tank Attachment
Fuel Tank-To-Filler Neck Hose Replacement
Removal
1. Drain fuel tank.
2. Remove filler tube housing bolts.
3. Disconnect filler tube vent hose.
4. Loosen clamps and remove hose from tank and filler (Figure 3-44).
Installation
1. Install hose on tank and filler tube and tighten hose clamps.
2. Install filler tube and housing.
3. Fill fuel tank and check for leaks.