H1 V8-65L DSL Turbo (1999) Fuel Filter Drain Hose and Valve Replacement
Fuel Filter: Service and Repair
Fuel Filter Drain Hose and Valve Replacement
Figure 3-42: Fuel Filter Drain Hose And Valve Location
Fuel Filter Drain Hose and Valve Replacement
NOTE: To remove fuel filter drain valve only, perform steps 3 and 4.
Removal
1. Disconnect fuel filter drain hose from fuel filter (Figure 3-42).
2. Remove two tie straps and separate drain hose from transmission oil cooler lines.
3. Remove two tie straps and separate drain hose from transmission oil cooler lines.
4. Disconnect drain hose at drain valve.
5. Remove nut and drain valve from body.
Installation
1. Install drain valve on body and tighten nut.
2. Connect drain hose to valve.
3. Connect drain hose to fuel filter.
4. Secure drain hose to transmission oil cooler lines with two tie straps.
5. Start engine and check for leaks.
