H2 V8-6.0L (2004)
Trunk / Liftgate Weatherstrip: Service and Repair
Liftgate Wedge Replacement
Liftgate Wedge Replacement
Removal Procedure
1. Open the liftgate.
2. Remove the fastener (1) retaining the wedge to the liftgate.
3. Remove the wedge (2) from the liftgate.
Installation Procedure
1. Align the wedge (2) to the liftgate.
Notice: Refer to Fastener Notice See: Service Precautions .
2. Install the fastener (1) retaining the wedge to the
liftgate.
Tighten the fastener to 9 Nm (7 lb ft).