H2 V8-6.0L (2004)
4. Install the retaining bracket bolt (5).
Tighten
Tighten the bolt to 10 N.m (89 lb in).
5. Install the accumulator (3).
6. Install the accumulator bracket nut (4).
Tighten
Tighten the nut to 9 N.m (80 lb in).
7. Install the nut (2) to the evaporator fitting.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Install the compressor hose to the accumulator.
9. Install the compressor hose nut to the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
10. Connect the electrical connector to the A/C low pressure switch.
11. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the component using the J 39400-A.
