H2 V8-6.0L (2004)
Power Steering Line/Hose: Service and Repair
Power Brake Booster Outlet Hose Replacement
POWER BRAKE BOOSTER OUTLET HOSE REPLACEMENT
REMOVAL PROCEDURE
NOTE: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
1. Install a drain pan under the vehicle.
2. Remove the brake booster outlet hose from the brake booster.
3. Remove the clamp retaining the brake booster outlet hose (1) to the power steering pump.
4. Remove the brake booster outlet hose from the vehicle.
INSTALLATION PROCEDURE
NOTE: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier.
Failure to follow these procedures could result in component damage.