H2 V8-6.0L (2004)
Tires: Service and Repair
Tire Rotation
Note: The content of this article / image reflects the changes called out by TSB # 05-00-09-004.
TIRE ROTATION
REMOVAL PROCEDURE
In order to equalize wear, rotate the tires at the specified intervals. In addition to scheduled rotation, rotate the tire and wheel assembly whenever you
notice uneven tire wear.
Radial tires tend to wear faster in the shoulder area, particularly in front positions, due to design. Radial tires in non-drive locations may develop an
irregular wear pattern that can generate tire noise. This especially makes regular tire rotation necessary.
1. If the spare tire is to be included in the rotation, remove it from the vehicle.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the 4 center caps from the wheels.
4. Remove the lug nuts from all of the 4 wheels.
5. Including the spare tire, rotate the 5 tires as shown.
6. Excluding the spare tire rotate the 4 tires as shown.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
