H2 V8-6.0L (2004)
5. Insert a drift or a large screwdriver through the brake caliper into 1 of the brake rotor vanes in order to prevent the wheel drive shaft from turning.
Tighten
-
Tighten the inboard flange bolts to 79 N.m (58 lb ft).
-
Tighten the hub nut to 210 N.m (155 lb ft).
6. Remove the drift from the rotor.
7. Install the drive axle center cap, if equipped.
8. Install the stabilizer shaft link.
9. Install the wheel and tire assembly.
10. Lower the vehicle.
