H2 V8-6.2L (2008)
2. Remove the end caps from the crossbars of the roof rack on both sides.
3. Peel back the weatherstrip on the crossbar to reveal the stanchion screws.
4. Remove the stanchion screws from both crossbars and save for later reuse.
5. Replace the end caps to the crossbars of the roof rack and store for later reuse.
6. With the aid of an assistant, lower the roof basket into the position so that the mounts of the basket rest in the stanchions where the crossbars were
removed.
7. When correctly seated, hand tighten the stanchion knobs.
