H2 V8-6.2L (2008)
Luggage Rack: Service and Repair
Luggage Carrier Replacement (SUT)
Luggage Carrier Replacement (SUT)
Removal Procedure
1. Remove the side rail covers by unclipping the covers from the side rails.
2. Remove the cross rails by loosening the lock knobs on both ends.
3. Slide the cross rails to the rear of vehicle to remove from the luggage carrier.
4. Remove the clearance lamps from the side rails by removing the screw and lifting to disengage the locator tab.
5. Remove the luggage carrier side rail end caps. Refer to Luggage Carrier Side Rear Rail Cap Replacement (See: Luggage Carrier Side Rear Rail
Cap Replacement) .
6. Open both side doors on the side the luggage side rail is being removed.
7. Remove the bolts from the side rails.
8. Remove the luggage carrier side rails from the roof panel.
9. Remove the drip edge weatherstrip and transfer.
Installation Procedure
