H2 V8-6.2L (2008)
1. Remove the seat cushion trim cover (8) and the pad (7). Refer to Rear Seat Cushion Cover and Pad Replacement (See: Rear Seat Cushion Cover
and Pad Replacement) .
2. Remove the bolts from the hinge assembly.
3. Remove the seat cushion frame (5).
Installation Procedure
1. Install the seat cushion frame (5).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolts to the hinge assembly.
Tighten the bolts to 7 N.m (61 lb in).
3. Install the seat cushion trim cover (8) and the pad (7). Refer to Rear Seat Cushion Cover and Pad Replacement (See: Rear Seat Cushion Cover
and Pad Replacement) .
