H2 V8-6.2L (2008)
1. Position the tow eye to either the latch (2) or hinge side (3) of the spare tire carrier.
2. Install the bolt.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the nut.
Tighten the nut to 85 N.m (63 lb ft).
4. If replacing the hinge side, install the spare tire carrier. Refer to Spare Tire Carrier Replacement (See: Maintenance/Wheels and Tires/Tires/Spare
Tire/Service and Repair) .
5. Secure the spare tire carrier to the rear bumper latch.