H2 V8-6.2L (2008)
1. Align the air inlet grille to the vehicle, and secure grille by ensuring all 4 retainers (3) are properly seated.
2. Connect the washer hose connection (1).
3. Install the push-in retainers.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the side fasteners.
Tighten the fasteners to 2.5 N.m (22 lb in).
5. Install the wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and
Repair/Windshield Wiper Arm Replacement) .
6. Install the non-functional air inlet caps. Refer to Non-Functional Air Inlet Grille Panel Replacement (See: Non-Functional Air Inlet Grille Panel
Replacement) .