H2 V8-6.2L (2008)
1. Starting at the top center of the door opening, install the weatherstrip (2) to the pinch-weld flange (1) and work down the right and left sides
towards the bottom center, being careful not to stretch the weatherstrip during installation.
2. Use a rubber mallet to ensure proper seating of the weatherstrip on the pinch-weld flange.
3. Close the door.
Rear Door Weatherstrip Replacement
Rear Door Weatherstrip Replacement
Removal Procedure
1. Open the doors.
2. Using a flat-bladed tool, remove the weatherstrip by releasing the 22 retainers located on the weatherstrip from the locating holes (1) on the door.
Installation Procedure
1. Install weatherstrip by securing the 22 retainers into their correct locating holes (1) on the door.
2. Close the doors.
Rear Side Door Auxiliary Weatherstrip Replacement
Rear Side Door Auxiliary Weatherstrip Replacement
Removal Procedure
1. Open the doors.