H2 V8-6.2L (2008)
1. Starting at the top rear edge of the door, press the rear door auxiliary weatherstrip onto the pinch-weld flange working from top to bottom.
2. Reposition the upper side door auxiliary weatherstrip (2) onto the bottom edge of the luggage carrier side rail (1).
3. Close the rear side door.
Rear Side Door Upper Auxiliary Weatherstrip Replacement
Rear Side Door Upper Auxiliary Weatherstrip Replacement
Removal Procedure
1. Open both front and rear side doors.
2. Remove the weatherstrip (2) by pulling the weatherstrip off of the pinch-weld flange (1).
Installation Procedure