H2 V8-6.2L (2008)
5. Remove the power brake booster inlet hose roll pin (1).
6. Release the hose clamp at the master cylinder reservoir and remove the inlet hose (2) with the union from the power brake booster and the master
cylinder reservoir.
7. Remove the inlet hose union O-ring seal (3).
Installation Procedure
1. Install the inlet hose union O-ring seal (3).
2. Release the hose clamp at the master cylinder reservoir and install the inlet hose (2) with the union to the power brake booster and the master
cylinder reservoir.
3. Install the power brake booster inlet hose roll pin (1).
