H2 V8-6.2L (2008)
11. Install the 2 rear brake pipes (1) to the brake master cylinder.
Tighten the fittings to 25 N.m (18 lb ft).
12. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair/Hydraulic Brake
System Bleeding (Manual))Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair/Hydraulic Brake System
Bleeding (Pressure)) .
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Tools Required
CH-47830 Holding Fixture
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Removal Procedure