H2 V8-6.2L (2008)
Technical Service Bulletin # 07221
Date: 070919
Recall - Wheel Speed Sensor Wiring/EBCM programming
Subject:
Product Safety - ABS Operation
# 07221 - (09/19/2007)
Models:
2008 HUMMER H2
Condition
General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2008 HUMMER H2 vehicles. Certain wires in the ABS
wheel speed sensor wiring harness may be reversed.
This condition could result in increased stopping distance under certain circumstances. If vehicle stopping distance is increased, a crash could occur.
Correction
Depending on the VIN, dealers are to correct the ABS wheel speed sensor wiring if required, reprogram the brake control module, or both.
Vehicles Involved