H2 V8-6.2L (2008)
5. Slowly release the tension on the belt tensioner.
6. Remove the breaker bar and socket from the belt tensioner bolt.
7. Inspect the drive belt for proper installation and alignment.
Important: Align the arrow at the throttle body end of the duct with the throttle body attaching stud.
8. Install the air cleaner outlet duct.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
9. Tighten the air cleaner outlet duct clamps at the following locations:
*
Throttle body
*
MAF/IAT sensor
Tighten the air cleaner outlet duct clamp screws to 7 N.m (62 lb in).
