H2 V8-6.2L (2008)
2. Using the J 43181 disconnect the inlet heater hose from the heater core.
1. Install the J 43181 to the heater core inlet pipe.
2. Close the tool around the heater core inlet pipe.
3. Firmly pull the tool into the quick connect end of the heater inlet hose.
4. Firmly grasp the heater hose. Pull the heater hose forward in order to disengage the hose from the heater core.
3. Using the J 43181 disconnect the surge tank outlet hose from the heater core outlet.
1. Install the J 43181 to the heater core outlet pipe.
2. Close the tool around the heater core outlet pipe.
3. Firmly pull the tool into the quick connect end of the heater outlet hose.
4. Firmly grasp the heater hose. Pull the heater hose forward in order to disengage the hose from the heater core.
4. Remove the surge tank outlet hose (3) from the mounting clip (2).