hummer Workshop Repair Guides

Hummer Workshop Service and Repair Manuals

Procedures|Page 8662 > < Procedures|Page 8660
Page 10
background image

Auxiliary Air Conditioning Evaporator Rear Tube Replacement

Auxiliary Air Conditioning Evaporator Rear Tube Replacement

Special Tools

J 39400-A Halogen Leak Detector

Removal Procedure

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging  (See: Service and Repair/Refrigerant Recovery and

Recharging) .

2. Drain the engine coolant if necessary. Refer to Cooling System Draining and Filling (Static Fill)  (See: Engine, Cooling and Exhaust/Cooling

System/Service and Repair/Draining and Filling Cooling System)Cooling System Draining and Filling (Vac-N-Fill)  (See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair/Draining and Filling Cooling System) .

3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle  (See: Maintenance) .
4. Remove the right assist step if necessary. Refer to Assist Step Replacement (w/WS2, BVX)  (See: Body and Frame/Auxiliary Step / Running

Board/Service and Repair/Assist Step Replacement (w/WS2, BVX))Assist Step Replacement (Tubular BVE)  (See: Body and Frame/Auxiliary
Step / Running Board/Service and Repair/Assist Step Replacement (Tubular BVE)) .

5. Remove the rear wheelhouse liner. Refer to Wheelhouse Panel Replacement  (See: Body and Frame/Fender/Front Fender/Front Fender

Liner/Service and Repair) .

6. Remove the auxiliary A/C evaporator tubes connector nuts (1) from the intermediate connection point.
7. Remove the auxiliary heater tubes connector nuts (2) if necessary.

Procedures|Page 8662 > < Procedures|Page 8660