H2 V8-6.2L (2008)
Turn Signal Lamp: Service and Repair
Tail/Turn Signal Lamp Replacement (SUV)
Tail/Turn Signal Lamp Replacement (SUV)
Removal Procedure
1. Remove the screws from the lamp.
2. Remove the lamp from the body.
3. Disconnect the electrical harness at the connector.
4. Turn the bulb socket counterclockwise.
5. Remove the bulb from the socket.
Installation Procedure
1. Install the bulb to the socket.
2. Turn the bulb socket clockwise in order to lock.
3. Connect the electrical harness at the connector.
4. Install the lamp to the body.
Notice: Refer to Fastener Notice .
5. Install the screws to the lamp.
Tighten the screws to 6 N.m (53 lb in).
