H2 V8-6.2L (2008)
Hose/Line HVAC: Removal and Replacement
Discharge Hose Replacement
Discharge Hose Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and Repair/Refrigerant
Recovery and Recharging) .
2. Disconnect the electrical connector from the A/C recirculation switch.
3. Remove the A/C recirculation switch from the A/C discharge hose.
4. Remove the discharge hose bolt (6) from the A/C compressor (4).
5. Remove the discharge hose (5) from the A/C compressor (4).
6. Remove the discharge hose nut (1) from the condenser (2).
7. Remove the discharge hose (3) from the condenser (2).
8. Remove the discharge hose (3) from the vehicle.
9. Discard all of the used sealing washers.
10. Cap all of the A/C system openings.
Installation Procedure
