H2 V8-6.2L (2008)
Notice: Refer to Fastener Notice .
4. Install the suction hose nut (1) to the accumulator (3).
Tighten the nut to 16 N.m (12 lb ft).
5. Install the suction hose (1) to the compressor (4).
6. Install the suction hose mounting bolt (2) to the A/C Compressor (4).
Tighten the bolt to 16 N.m (12 lb ft).
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Refrigerant Recovery and Recharging) .
8. Leak test the fittings of the component using the J 39400-A .
Auxiliary Air Conditioning Evaporator Tube Replacement
Auxiliary Air Conditioning Evaporator Tube Replacement