H2 V8-6.2L (2008)
Radiator Hose: Service and Repair
Radiator Inlet Hose Replacement
Radiator Inlet Hose Replacement
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair/Draining and Filling Cooling System)Cooling System Draining and Filling (Vac-N-Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Draining and Filling Cooling System) .
2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Filters/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair) .
3. Reposition the radiator inlet hose clamp (3) from the engine (1).
4. Remove the radiator inlet hose (2) from the engine (1).
5. Remove the radiator inlet hose (4) from the mounting clip (3).
6. Reposition the radiator inlet hose clamp (5) from the radiator (6).
7. Remove the radiator inlet hose (4) from the radiator (6).
8. Remove the inlet hose from the vehicle.
Installation Procedure
1. Install the radiator inlet hose (4) to the radiator (6).
2. Position the radiator inlet hose clamp (5) to the radiator (6).
3. Install the radiator inlet hose (4) to the mounting clip (3).
4. Install the radiator inlet hose (2) to the engine (1).