H2 V8-6.2L (2008)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
Removal Procedure
1. Disconnect the spark plug wire at each spark plug.
*
Twist each spark plug 1/2 turn.
*
Pull only on the boot in order to remove the wire from each spark plug.
2. Disconnect the spark plug wire from the ignition coil.
*
Twist each spark plug boot 1/2 turn.
*
Pull only on the boot in order to remove the wires from the ignition coil.
Spark Plug Wire Length V8
*
The Melco(R), square design, uses a spark plug wire (1) that is 145 mm (5.70 in) length cable seal to cable seal.
*
The Delphi(R), round design uses a spark plug wire (2) that is 110 mm (4.30 in) length cable seal to cable seal.
*
There are 2 different manufacturers for the ignition coils. the Melco(R) (1) square design, and the Delphi(R) (2) round design. These 2 coils
use 2 different spark plug wire, and mounting brackets.
