H2 V8-6.2L (2008)
Important: Always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. DO NOT
apply any type of lubrication in the seal groove.
Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
3. Use the J 45722 in order to install the fuel sender lock ring. Turn the fuel sender lock ring in a clockwise direction.
4. Install fuel lines to the sender assembly. Refer to Fuel Hose/Pipes Assembly Replacement (See: Fuel Delivery and Air Induction/Fuel Supply
Line/Service and Repair/Fuel Hose/Pipes Assembly Replacement) .
5. Install the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and
Replacement) .