H2 V8-6.2L (2008)
1. Mark the connectors to their corresponding injectors to ensure correct reassembly.
2. Pull the CPA retainer (2) on the connector up one click.
3. Push the tab (1) on the connector in.
4. Disconnect the fuel injector electrical connector.
5. Repeat the steps for each injector electrical connector.
16. Remove the positive crankcase ventilation (PCV) hose.
17. Disconnect the fuel feed pipe (1) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Metal Collar Quick Connect Fitting Service) .
