hummer Workshop Repair Guides

Hummer Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < Engine Controls - MIL ON/DTC's P1133/P1153|Page 4551
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
A/T - Clunk Noise First Gear/Engine Braking Sensation

TECHNICAL

Bulletin No.: 08-07-30-012

Date: March 13, 2008

Subject:
6L80 Automatic Transmission - Tip In Low Speed Clunk in First Gear When Throttle is Applied and Released, Engine Braking Sensation at Low Speeds
(Reprogram TCM)

Models:
2008 HUMMER H2, H2 SUT

with 6L80 6-Speed Automatic Transmission (RPO MYC)

Condition

Some customers may comment that the vehicle has a "Tip In" low speed clunk in first gear when the throttle is applied and released in normal "D" drive.
Other customers may comment on an engine braking sensation at low speeds in normal "D" drive.

Correction

A revised transmission calibration has been developed to address these issues. Reprogram the transmission control module (TCM) with updated
calibration files using the TIS2WEB Service Programming System (SPS) application. As always make sure your Tech 2(R) is updated with the latest
software version.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < Engine Controls - MIL ON/DTC's P1133/P1153|Page 4551