H2 V8-6.2L (2008)
Negative: Service and Repair
Engine Ground Strap Replacement
Engine Ground Strap Replacement
Removal Procedure
1. Remove the left hand catalytic convert. Refer to Catalytic Converter Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic
Converter/Service and Repair) .
2. Remove the engine wiring harness ground bolt.
3. Lower the vehicle.
4. Remove the ground strap nut from the stud at the front of dash.
5. Remove the ground strap from the stud.
Installation Procedure
1. Install the ground strap to the stud.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the ground strap nut to the stud at the front of dash.
Tighten the nut to 9 N.m (80 lb in).
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
