H2 V8-6.2L (2008)
10. Install the positive battery cable (1) into the junction block.
Tighten the nut to 9 N.m (80 lb in).
11. Snap the junction block cover closed.
12. Tighten the positive cable bolt at the UBEC.
Tighten the bolt to 9 N.m (80 lb in).
13. Position the UBEC lower cover.
14. Install the UBEC cover.
15. Connect the positive battery cable.
Tighten the bolt to 17 N.m (13 lb ft).
16. Snap the positive battery cable cap closed.
17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair/Battery Negative
Cable Disconnection and Connection) .
