H2 V8-6.2L (2008)
4. Install the range selector cable (1) to the transmission shift control lever housing.
5. Install the range selector cable end (2) to the transmission shift control lever ball stud.
6. Install the console. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front
Floor Console Replacement) .
7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
8. Ensure that the transmission range selector lever is in the mechanical park position.
9. Install the range selector cable (3) into the range selector cable bracket (1) at the transmission.
10. Install the range selector cable retaining clip (2).
11. Install the range selector cable (3) to the transmission range selector lever ball stud (4).
12. Lower the vehicle.
