H2 V8-6.2L (2008)
Installation Procedure
1. Install the differential side bearings by doing the following:
1. In order to protect the differential case, install the J 36597 in the case on the side opposite the bearing installation.
2. Install the J 29710 (2) and the J 8092 (1) onto the differential case bearing as shown.
3. Drive the bearing onto the case using the J 29710 and the J 8092 .
2. Install the differential assembly. Refer to Differential Replacement (See: Service and Repair/Removal and Replacement/Rear Drive
Axle/Differential Replacement) .
