H2 V8-6.2L (2008)
5. Align the hole in the pinion shaft with the bolt hole in the differential case.
Notice: Refer to Fastener Notice .
6. Install the new pinion shaft locking bolt.
Tighten the pinion shaft locking bolt to 53 N.m (39 lb ft).
7. Install the rear cover and the gasket. Refer to Rear Axle Housing Cover and Gasket Replacement (See: Differential Assembly/Differential
Cover/Service and Repair) .
8. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement) .
9. Install the brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Rear Brake Rotor Replacement) .
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
11. Fill the rear axle. Refer to Rear Axle Lubricant Replacement (See: Differential Assembly/Fluid - Differential/Service and Repair/Removal and
Replacement/Rear Drive Axle) .
12. Lower the vehicle.
