H2 V8-6.2L (2008)
Seals and Gaskets: Service and Repair
Front Output Shaft Seal Replacement
Front Output Shaft Seal Replacement
Tools Required
*
J 8092 Universal Handle
*
J 43484 Front Output Shaft Seal Installer
Removal Procedure
Notice: Refer to Transfer Case Seal Removal Notice (See: Service Precautions) .
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
2. Remove the front propeller shaft from the vehicle. Refer to Front Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and
Joints/Drive/Propeller Shaft/Service and Repair/Front Propeller Shaft Replacement) .
3. Insert a flat-tipped screw driver in the inner race.
4. Pry the inner race forward.
5. Insert a small pry bar in the inner race.
6. Pry the inner part of the seal from the outer seal body.
7. Remove the inner part of the seal.
