H2 V8-6.2L (2008)
1. Get the level sensor in a horizontal position as shown (1).
2. Install the level sensor (6) in the washer solvent container (5). Ensure to reference the locating mark made during removal.
3. Connect the washer solvent electrical connector.
4. Install the A/C low pressure switch. Refer to Air Conditioning (A/C) Low Pressure Switch Replacement (See: Heating and Air
Conditioning/Refrigerant Pressure Sensor / Switch/Service and Repair/Air Conditioning (A/C) Low Pressure Switch Replacement) .
5. Refill the washer solvent container.
6. Inspect for leaks.
7. Close the hood.